IntelleX™ memory perforating

IntelleX™ tools retain a complete log of time, status, pressure, temperature, tilt, shock and output voltage data is stored to individual banks of flash memory for post-job analysis.

The IntelleX™ Low Power Electronic Firing Head is used to activate (or de-activate) tools using a pre-programmed sequence of time, pressure/temperature safe windows, and if required, a series of pressure pulses and/or acceleration movements.

The options of using both pre-programmed and wellbore conditions enables a fail-safe system to be run reliably, efficiently and with assurance that the memory job will be completed as designed.

All IntelleX™ tools have undergone a rigorous third-party safety assessment examining both the system design and its immunity from stray Radio Frequency Energy (RF), stray DC Voltage (such as Arc Welding) and Lightning strikes.

The assessment concluded:

"In all cases at least three points of failure were identified before a risk of an inadvertent firing arose. These safety features are further augmented by the output relay and the mechanical pressure and temperature switches."

... and that:

"It can be concluded that the IntelleX™ Low Power Electronic Firing Head meets the recommendations of API RP67 and also demonstrates a high degree of safety in the likely offshore environment."

IntelleX™ Low Power Electronic Firing Head tools  can be used with:

 

Perforating guns

Tubing punches

Plug setting tools

Fluid sampling tools

Cutting tools

Sleeves and valve positioning tools

To determine compatibility with your tools please contact us at: enquire@probe1.com