| Image | Name | SKU | Description |
|---|---|---|---|
 | Cable Protectors | 18700-641 | Cross-coupling Cable Protectors are installed to secure the permanent downhole cable to the production tubing. They are typically installed on the coupling of the production tubing, designed to protect and support the downhole cable from physical damage during … |
 | HD Crossover (GO to GO) for TCU - 1 3/8 in. | HXO014 | The HD Crossover “GO to GO” (HXO014) is intended to be used with the Telemetry Control Unit (TCU) as a expendable piece to prevent galling and/or damage at the upper connection of the TCU pressure housing. Ratings & … |
 | HD Crossover for RAS - 1 11/16 in. | HXO009 and HXO010 | The HD Crossovers (HXO009 and HXO010) are used to allow the RAS002 to run upside down (inverted) as this may be required in some circumstances. They may also be used as a “flip kit” to allow other HD … |
 | Knuckle Joint Tool - HD - 1 11/16 in. | KJT001 | The Knuckle Joint Tool (KJT001) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled tubing or a … |
 | Knuckle Joint Tool - HD - 1 3/8 in. | KJT101 | The Knuckle Joint Tool (KJT101) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled tubing or a … |
| Knuckle Joint Tool - HD - 2 1/8 in. | KJT002 | The Knuckle Joint Tool (KJT002) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled tubing or a … |
 | Knuckle Joint Tool w/ Wear Banding - HD - 1 11/16 in. | KJT003 | The Knuckle Joint Tool with Wear Banding (KJT003) is used to reduce overall rigid tool length in dual completions where tubing may be twisted, to provide an offset, or in pairs to decouple the tool string from coiled … |
 | Permanent Gauge Downhole Cable | AN004-150-004 | The Permanent Downhole Cable provides a mechanism to communicate to the downhole gauge, providing power and telemetry to and from the sensor. The standard format is 0.25” OD, 316SS TEC protected by 11mm x 11mm Fluoropolymer encapsulation that … |
 | Swivel Joint Tool - HD - 1 11/16 in. | SJT001 | The Swivel Joint Tool (SJT001) is a pressure compensated mono-conductor swivel that allows rotation between the upper and lower tool joints while maintaining electrical continuity. The pressure compensation system allows for free rotation under pressure. Ratings & Dimensions … |
 | Wellhead Outlet | 500-0043 | The Wellhead Outlet connects the permanent downhole cable (TEC Line) to an armored surface cable while isolating the electrical connection in an explosion-proof housing, and provides a dual safety barrier … |
This site uses cookies to offer you a better browsing experience. If you consent close and accept this banner. EU Residents: Probe is committed to protecting personal data of our EU employees, contractors, customers, and vendors, regardless of where that data is processed. We have a robust security program and an established series of internal policies, processes, and practices across our organization to ensure that personal data of EU individuals is processed appropriately and protected in our information systems. You can find our GDRU policy at the bottom of this page. Click here for our
Cookie Policy
Footer
For Customers
• Service and Repair
• Tech Support
• Request Quote
• Customer Portal
About Us
• The Probe Way
• Mission, Vision and Values
• Careers
• Solution Platforms
• Contact
• Locations
Copyright © 2022 Probe. All Rights Reserved. Probe is a registered trademark of Probe Technologies Holdings, Inc. in the United States.